Duratec fuel injectors

[JohnCh]

Does anyone know the flow rate of the stock 2.0L Duratec fuel injectors?

Thanks,
John

[Elv15]

injectors

Hi John,

I don't know, but if you have an aftermarket induction I believe they fall pretty short.

You might want to search on blatchat, or just ask Ammo at www.raceco.com directly.

Cheers,

Tom

[Roll a 7]

John, Try asking Tim @ Marren fuel injection. Just google for the relevant data. 8)

[JohnCh]

I already have a replacement set of high flow injectors (too high actually, but that's another story) ready to go in, but I need to know the difference in flow rates so my ECU can convert my injection tables to work without further tuning.

Ammo is out until October 1st, but I haven't tried Tim Marren yet. I'll go down that path next.

Thanks,
John

[JohnCh]

Finally found the answer to my original query. In case anyone is interested, the stock 2.0L injectors (Bosch 0280 156 009) flows 210 cc/min @ 3.0 bar.

-John

[Roll a 7]

John, I have 4 Weber Pico injectors flowed @ 330cc if you are looking for something with more flow. These weigh something like 40 grams compared to conventional injectors which weigh around 100 grams. Lighter IS Faster! Brad

[JohnCh]

I might be interested in those! You have PM!