All,
It is with a little bit of a sadness that I now shall part ways with California and move to Portland.
As you know I've been doing R&D for Jaguar Land Rover's PDX Lab for more than a year. Since my team up there is rapidly expanding, JLR offered me a relocation package that I signed yesterday. The move will be at the end of July. Although it rains a lot up there during the winter, it is somewhat balanced out by the fact that the track is 15 minutes outside town.
I would be happy to continue to administer the CCC site, although if somebody else wants to take over the responsibility I'd be happy to make that happen too.
Since I'll be moving, I'm giving away a bunch of stuff that I will not be needing:
1. New and complete set of Ford Duratec 2.3L (Ranger) pistons and con rods. Stored in ziplocks
2. New head and cams for the same engine. Valves and buckets are missing, although springs are included.
3. Shitty hydraulic press. Used once: http://www.harborfreight.com/6-ton-a...ress-1666.html
4. One Duratec 2.3L exhaust manifold - fabricated by none other than Mr W. Sours. Surface rust, but never used.
5. One engine stand.
6. One new set of Ross custom fabricated Duratec 2.3L race pistons. See spec sheet in pics. These were $800, so I'd like $250 for them.
Pics: http://imgur.com/a/lCgAW
I also have Gert's massive shop muffler to appease those pesky neighbors when you are testing your engine. If he doesn't want it back, it will be up for grabs.
/Magnus F.
It is with a little bit of a sadness that I now shall part ways with California and move to Portland.
As you know I've been doing R&D for Jaguar Land Rover's PDX Lab for more than a year. Since my team up there is rapidly expanding, JLR offered me a relocation package that I signed yesterday. The move will be at the end of July. Although it rains a lot up there during the winter, it is somewhat balanced out by the fact that the track is 15 minutes outside town.
I would be happy to continue to administer the CCC site, although if somebody else wants to take over the responsibility I'd be happy to make that happen too.
Since I'll be moving, I'm giving away a bunch of stuff that I will not be needing:
1. New and complete set of Ford Duratec 2.3L (Ranger) pistons and con rods. Stored in ziplocks
2. New head and cams for the same engine. Valves and buckets are missing, although springs are included.
3. Shitty hydraulic press. Used once: http://www.harborfreight.com/6-ton-a...ress-1666.html
4. One Duratec 2.3L exhaust manifold - fabricated by none other than Mr W. Sours. Surface rust, but never used.
5. One engine stand.
6. One new set of Ross custom fabricated Duratec 2.3L race pistons. See spec sheet in pics. These were $800, so I'd like $250 for them.
Pics: http://imgur.com/a/lCgAW
I also have Gert's massive shop muffler to appease those pesky neighbors when you are testing your engine. If he doesn't want it back, it will be up for grabs.
/Magnus F.
Comment