Announcement

Collapse

Seven Wiki Available

Please check out our wiki available at:

http://www.californiacaterhamclub.com/wiki7
See more
See less

SuperCarSunday October 6th?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • slomove
    replied
    Thanks Randall, that might help for comparison. Maybe I can just copy the injection segment into the map file, adjust the microsecond/bit value and try if that give me a better initial map. email is my forum name AT earthlink.net.

    Leave a comment:


  • rzempel
    replied
    I'll be happy to send you a copy of my map, if you think it might help.

    Randall

    Leave a comment:


  • slomove
    replied
    The Emerald has an autocal feature. Once that is activated you apply full throttle (motor not running) and release. The ECU then spans the maps over the measured throttle range. Right now it shows 0.46V - 4.37V for the full opening range with 1000rpm idle sitting at approx 0.51V. The whole range can of course be moved a little by mechanically turning the sensor and I tried to get somewhat equal margins to 0V and 5V.
    Last edited by slomove; October 3, 2013, 09:14 AM.

    Leave a comment:


  • slomove
    replied
    Originally posted by Doug Liedblad View Post
    Can't you load your old map?
    Yes I can and I did. But in my infinite wisdom I had the old TPS de-linearized with a parallel resistor to get better resolution at low throttle. I can not do that with the solid state TPS and thus the mid-range map positions are all shifted.

    The theoretical good news is the upgraded ECU has a self-mapping/learning feature based on the wideband sensor input. I hope that really works.
    Last edited by slomove; October 3, 2013, 09:12 AM.

    Leave a comment:


  • moosetestbestanden
    replied
    Slight hijack...

    Originally posted by slomove View Post
    I am back from Germany. And I got my ECU back from the UK after upgrade. Also installed the new Hall-effect TPS.
    What idle voltage did you calibrate it to? Baseline on mine is .25V

    Leave a comment:


  • Doug Liedblad
    replied
    Can't you load your old map?

    Leave a comment:


  • slomove
    replied
    I am back from Germany. And I got my ECU back from the UK after upgrade. Also installed the new Hall-effect TPS. Good news I can start the engine and it idles. Bad news the car does not drive at all. Maps are screwed up and the Baro sensor needs configuration. Maybe I need to calibrate the crank position sensor, too.

    Anyway, it is anyway a moot point. Got to help my son move to Santa Barbara for his new job. Yes, another police job....

    Leave a comment:


  • moosetestbestanden
    replied
    Originally posted by Doug Liedblad View Post

    I believe the feature marque is Shelby Cars.

    Doug
    Y'all can walk around and look at all the cars that your car can spank the hell out of on track. They're really quite slooow!

    Leave a comment:


  • Doug Liedblad
    started a topic SuperCarSunday October 6th?

    SuperCarSunday October 6th?

    Anyone interested for this weekend?

    I believe the feature marque is Shelby Cars.

    Doug
Working...
X